Filter
Top Products
Leica IC80 HD Manual 21
Before capturing the image, ensure
that enough memory is available on
the SD card and that write protection has not
been activated. If the SD memory card is full or
protected, the LED of the Leica IC80 HD remains
red, and you cannot acquire any more images.
If you want to use the stand-alone kit,
the camera must not simultaneously be
connected to a computer. If it is, you cannot
save any images to the SD card.
In the highest resolution, a single image
takes up approx. 1.3 megabytes of storage
space on the SD card. This means that per giga-
byte of capacity, you can save over 700 images.
Capturing images
1. Focus on the specimen.
2. Insert the SD memory card into the slot on
the side of the camera until you hear it click
into position.
The LED of the camera is illuminated in green.
The camera is now ready to save images to the
SD memory card.
3. Briey press the red image capture button
on the side of the camera to acquire an
image.
You hear a signal tone as conrmation. While
the image is acquired, the camera LED ashes
green and the word "Capturing" ashes on the
monitor.
4. After the image acquisition is complete,
press the SD memory card into the storage
space so that it pops out.
You can now transfer the images to your
computer using a corresponding SD memory
card reader.
Capturing Images without a Computer