Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model SMH Series Chain Hoist. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This tool has
been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
D
C
H
AB
D
C
AB
H
1/2-ton, 1-ton, 1-1/2-ton, 2-ton 10-ton3-ton, 5-ton
D
C
AB
H
JJ J
Rated
Capacity
(ton)
No. of
Falls
Load
Chain
Dia.
(m)
Pull to
Lift
Capacity
(lbs)
Req’d
Hand
Chain
(ft.) to lift
load 1
A
(in)
B
(in)
C
(in)
D
(in)
H
min.
(in)
J
(in)
1/2 1 5 49 32 5.20 4.41 1.02 1.38 13 1.26
1 1 6.3 80 37 6.14 5.20 1.18 1.57 15 1.36
1-1/2 1 7 82 58 7.00 5.75 1.34 1.77 17.5 1.61
2 1 8 91 70 7.72 5.75 1.50 1.97 18.5 1.67
3 2 7 86 116 8.66 5.75 1.65 2.17 23.5 2.72
5 2 9 97 172 10.31 6.69 1.89 2.56 28 3.03
10 4 9 104 344 14.96 6.69 2.56 3.35 35 4.33
* Chain is available in various lengths. Specify required length when ordering.
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.