Filter
Top Products
14
Load Limits
Load Chain
Capacity
5 Links
Normal
5 Links
Limit
1/2 ton 2.95" 3.02"
1 ton 3.74” 3.83"
1-1/2 ton 4.13" 4.23"
2 ton 4.72” 4.84"
3 ton 4.13” 4.23"
5 ton 5.31” 5.44"
10 ton 5.31" 5.44"
Table 1
Carefully inspect the entire load chain. As
illustrated in Figure 15, measure five consecutive
links with calipers to measure the length. Check
every three feet and especially where excessive
wear is indicated. Any load chain that shows
noticeable deformation or heat influence must be
replaced with a new one. Never extend load chain
by welding a second piece to the original.
Hooks (Top & Bottom)
Capacity
“A”
Normal
“A”
Limit
1/2 ton 1.02" 1.17"
1 ton 1.18” 1.36"
1-1/2 ton 1.34" 1.54"
2 ton 1.50” 1.73”
3 ton 1.65” 1.90”
5 ton 1.89” 2.17”
10 ton 2.56" 2.94"
Table 2
See Figure 16. Replace the hook when the “A”
measurement is wider than “A” Limit in the table
above. Never heat treat the hook or attach anything
to the hook by welding.
Figure 15
Figure 16
Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848 between 7:30 a.m. and 5:30 p.m. (CST), Monday through Friday. Having the Model
Number and Serial Number of your machine available when you call will allow us to serve you quickly and
accurately.