Filter
Top Products
Important: Read complete instructions before beginning installation.
Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly and plumbing
and fittings necessary for whirlpool operation. An optional drain/overflow kit is available for installation on the bath.
Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been
made. Do not lift the bath by the plumbing at any time; handle by the shell only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in
the finish, do not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from
the warranty. Jacuzzi Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in
good order to the carrier. Refer any claims for damage to the carrier. For definitions of warranty coverage and
limitations, refer to the published warranty information packed with the product.
All bath units are factory tested for proper operation and watertight connections prior to shipping. Note: Prior to
installation, the bath must be filled with water and operated to check for leaks that may have resulted from
shipping damage or mishandling. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been
discovered, repaired, or avoided by following this inspection and testing procedure.
BATHS WITHOUT INTEGRAL SKIRT
END VIEW
H
W
SIDE VIEW
L
2"
51 mm
L
1"
25.4 mm
H
W
SIDE VIEW
BATHS WITH INTEGRAL SKIRT
END VIEW
SPECIFICATIONS (Rectangular)
MODEL
PRODUCT
WEIGHT
AVERAGE
OPERATING
GALLONAGE
TOTAL WEIGHT/
FLOOR LOADING
DIMENSIONS
DRAIN/OVERFLOW
DIMENSIONS
SKIRT &
MOUNTING
CUTOUT
HEATER READY
FOR FIELD
INSTALLATION
ESPREE 6032 60" (1524 mm) L
32" ( 813 mm) W
22" ( 559 mm) H
785 lb
(357 kg)/
59lb/sq. ft.
(288 kg/sq. m)
50 Min U.S. gal
(189 liters)
58 Max U.S. gal
(220 liters)
102 lb
(46 kg)
18-1/16" (459 mm) A
10-1/4" (273 mm) B
Not
Available
*Add 1/4" to this dimension when roughing-in for 3-wall niche.
ESPREE 6036 60" (1524 mm) L
36" ( 914 mm) W
20" ( 508 mm) H
825 lb
(375 kg)/
55 lb/sq. ft.
(268 kg/sq. m)
117 lb
(53 kg)
Not
Available
58" x 34"
Yes
(U395000 HEATER KIT)
ESPREE 6032
WITH INTEGRAL
SKIRT
60" (1524 mm) L*
32" ( 813 mm) W
22" ( 559 mm) H
113 lb
(51 kg)
16-7/8" (429 mm) A
10-13/16" (275 mm) B
Integral
NA
Yes
(S750000 HEATER KIT)
ESPREE 6042
60" (1524 mm) L
42" (1067 mm) W
20" ( 508 mm) H
936 lb
(425 kg)/
67 lb/sq. ft.
(326 kg/sq. m)
127 lb
(58 kg)
Not
Available
58" x 40"
Yes
(S750000 HEATER KIT)
ESPREE 7236 72" (1829 mm) L
36" ( 914 mm) W
20" ( 508 mm) H
911 lb
(414 kg)/
51 lb/sq. ft.
(249 kg/sq. m)
120 lb
(55 kg)
Not
Available
70" X 34"
Yes
(U395000 HEATER KIT)
ESPREE 6042
WITH INTEGRAL
SKIRT
60" (1524 mm) L*
42" (1067 mm) W
20" ( 508 mm) H
893 lb
(406 kg)/
51 lb/sq. ft.
(249 kg/sq. m)
127 lb
(57 kg)
Integral
NA
Yes
(S750000 HEATER KIT)
RECTANGULAR BATHS
ESPREE 7242 72" (1829 mm) L
42" (1067 mm) W
20" ( 508 mm) H
886 lb
(403 kg)/
42 lb/sq. ft.
(205 kg/sq. m)
120 lb
(55 kg)
Not
Available
70" X 40"
Yes
(U395000 HEATER KIT)
SPECIFICATIONS
16-7/8" (429 mm) A
15-5/8" (397 mm) B
16-7/8" (429 mm) A
15-5/8" (397 mm) B
16-7/8" (429 mm) A
10-13/16" (275 mm) B
16-7/8" (432 mm) A
15-5/8" (394 mm) B
16-78" (432 mm) A
15-5/8" (394 mm) B
ESPREE 542**
BACK MASSAGE
60" (1524 mm) L
42" (1067 mm) W
20" ( 508 mm) H
58" x 40"
16-7/8" (429 mm) A
15-5/8" (397 mm) B
DRAIN/OVERFLOW
A
B
Not
Available
Yes
(S750000 HEATER KIT)
936 lb
(425 kg)/
54 lb/sq. ft.
(263 kg/sq. m)
128 lb
(58 kg)
See
Page 4
785 lb
(357 kg)/
59lb/sq. ft.
(288 kg/sq. m)
50 Min U.S. gal
(189 liters)
58 Max U.S. gal
(220 liters)
Yes
(S750000 HEATER KIT)
NOTE: The overall dimensions are nominal with a tolerance of +0 and -1/4".
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeat: 115 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 115 VAC, 15 Amp, 60 Hz. dedicated GFCI protected separate circuit.
**115VAC, 20AMP, 60Hz. *115VAC, 20AMP, 60Hz.
50 Min U.S. gal
(189 liters)
61 Max U.S. gal
(231 liters)
60 Min U.S. gal
(227 liters)
68 Max U.S. gal
(257 liters)
60 Min U.S. gal
(227 liters)
68 Max U.S. gal
(257 liters)
58 Min U.S. gal
(219 liters)
66 Max U.S. gal
(250 liters)
64 Min U.S. gal
(242 liters)
73 Max U.S. gal
(276 liters)
74 Min U.S. gal
(280 liters)
89 Max U.S. gal
(336 liters)
1
Jacuzzi Whirlpool Bath© U961000F 12/04