TRD0000, TRx Owner’s Manual- Rev. 5.0, January 20, 2005
- 7 -
22..00
IImmppoorrttaanntt
IInnffoorrmmaattiioonn
aabboouutt
yyoouurr
TTRRxx
SSyysstteemm
Important: If you have any concerns or questions regarding weight capacities, or if the total
User Weight is determined to be greater than the Wheelchair and/or PPS Weight Capacity,
please contact our Technical Service Department immediately
i
HARD
HARD
W
W
ARE
ARE
Should you require any replacement hardware for your TRx seating system, please contact our Customer
Service Department for assistance.
iii) Weight Capacity Calculator
Calculating Wheelchair Weight Capacity:
Weight capacity of base manufacturer’s wheelchair
(see Powerbase Owners Manual) ________
Weight of the original wheelchair seat that is being replaced + ________
(if the original wheelchair seat is being re-installed, enter zero)
Weight of the TRx Power Positioning System
(refer to p.6, i. PPS Weight) - ________
Weight of auxiliary equipment (cushions, headrest, vent, vent battery, etc) - ________
Wheelchair Weight Capacity = ________
PPS Weight Capacity:
(refer to p.6, ii. PPS Weight Capacity) = ________
Calculating User Weight:
Weight of user (incl. clothing, footwear, jacket, etc) ________
Maximum Weight of personal gear (knapsack and contents, books, etc) + ________
Total User Weight = ________
AA
AA
BB
BB
CC
CC
must be less than and must be less than
AA
AA
BB
BB
CC
CC
CC
CC
***(
)***
WARNING!: All hardware used by Motion Concepts in the manufacture of our TRx Power Positioning
Systems, as well as the hardware supplied to complete the installation of our seating systems, is high
strength. Do not substitute hardware. Use only the hardware supplied with the seating system.
WHEELCHAIR
POWERBASEPPS