Filter
Top Products
TRD0000, TRx Owner’s Manual- Rev. 5.0, January 20, 2005
- 12 -
7.1 Using the Quickie Q-TRONIX Remote Joystick
The remote joystick connects to the Q-Tronix Controller, which in turn controls the performance of the
power base. By pressing down and releasing the on/off mode select toggle switch, the controller is
placed in the standard drive selection mode. To place the controller in the power positioning
mode, the on/off mode select toggle switch must be pulled up twice. The power positioning options
are selected by using the left and right directions on the joystick. The power positioning function that
is selected will be highlighted on the actuator lights (see chart). To operate the selected power posi-
tioning function, the forward and reverse directions on the joystick are used. To return to the standard
drive selection mode, the on/off mode select toggle switch must be pulled up once again.
Note: Please refer to the Quickie Owners Manual for complete joystick set-up and operating instructions.
JOYSTICK
ON/OFF MODE SELECT
TOGGLE SWITCH
*Push forward on joystick to tilt and pull back on the joystick to recline
(i.e. operates in “auto-reversing mode”)
L2
L1
L3
L4
7.0 Using the Power Base Joysticks
ACTUATOR LIGHTS
Function Actuator Light
L1 L2 L3 L4
*Tilt/Recline + +
Right Legrest +
Left Legrest +
Both Legrests + +
Elevating Seat +