Filter
Top Products
SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
Part No 1143150 31 TDX™ Wheelchairs
❑ Check power center mount front riggings for worn/frayed belts and/or loose fasteners.
If found, replace these items.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure that casters are free of debris.
Inspect/Adjust Weekly
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks
and wear, and should be replaced.
❑ Make sure wheels/casters have proper tension when wheels/casters are spun (when
free-wheeling). Wheels/casters should come to a gradual stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure and not damaged/missing.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Inspect tires for flat spots and wear.
❑ Make sure wheel locks DO NOT interfere with tires when rolling.
❑ Make sure wheel lock pivot point are free of wear and looseness.
❑ Make sure wheel locks are easy to engage.
❑ Check pneumatic tires for proper inflation.
❑ Ensure that casters are free of debris.
Inspect/Adjust Monthly
❑ Make sure axle nut and wheel mounting nuts are secure on drive wheels..
❑ Clean upholstery and armrests.
❑ Clean dirt and lint from axles.
❑ Clean dirt and lint from bearings.
❑ Inspect stabilizing springs.
❑ Inspect mechanical anti-dive for function.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Ensure that casters are free of debris.
Inspect/Adjust Periodically
❑ Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect all fasteners.
❑ Ensure clothing guards are secure.