Filter
Top Products
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
Part No 1143150 27 TDX™ Wheelchairs
Transferring To and From Other Seats
ƽ WARNING
ALWAYS turn the wheelchair power Off and engage the motor locks/clutches to
prevent the wheels from moving before attempting to transfer in or out of the
wheelchair. Also make sure every precaution is taken to reduce the gap distance.
Align both casters parallel with the object you are transferring onto.
CAUTION
When transferring, position yourself as far back as possible in the seat. This will pre-
vent broken screws, damaged upholstery and the possibility of the wheelchair tip-
ping forward.
NOTE: For this procedure, refer to FIGURE 2.5.
NOTE: Adequate mobility and upper body strength is required to perform this activity
independently.
1. Position the wheelchair as close as
possible along side the seat to which
you are transferring, with the casters
aligned parallel with the object.
2. Engage motor locks. Refer to
Disengaging/Engaging Motor Lock
Levers on page 65.
3. Shift body weight into seat with
transfer.
NOTE: During independent transfer, little or
no seat platform will be beneath you. Use a
transfer board if at all possible.
FIGURE 2.5 Transferring To and From
Other Seats
Minimize Gap Distance