Support User Manuals

Invacare R110 Mobility Aid User Manual

Open as PDF

of 52

INSTALLATION

Part No. 1145810 17 Electric Portable Patient Lift

SECTION 2— INSTALLATION

Introduction

ƽ WARNING

Use only Invacare parts in the assembly of this patient lift. The base legs, mast, and

boom assembly and the swivel bar are manufactured to specifications that assure

correct alignment of all parts for safe functional operation.

Unpacking the Patient Lift

NOTE:Forthisprocedure,referto

FIGURE 2.1

1. Unpackthecomponentsfromthe

shippingcarton.

NOTE:DONOTremovetheplasticwrapthat

securestheboomtothemast.

FIGURE 2.1 Unpacking the Patient Lift

Assembling the Mast to the Base

ƽ WARNING

The mast may be removed from the base for storage or transporting. Each time the

mast is removed and returned to the base, the mast MUST be properly secured to

the base assembly.

NOTE:Forthisprocedure,refertoFIGURE 2.2onpage18.

1. Iflocking‐typecastersareonthepatientlift,lockthem.

2. Removetheshoulderbolt,nutandwasher,thatsecuresthemastintheU‐shapecut‐

outofthebase.

3. Positionthemastinanuprightpositionandplacethemast

intotheU‐shapedcut‐out

ofthebase.

4. Insertshoulderboltwithwashersthroughthebaseandmast.

5. Securewithnut.

DO NOT

remove plastic

wrap at this time

previous next