Filter
Top Products
SECTION 5—MAINTENANCE
Part No. 1141494 25 Invacare Mobile Recliners
8. Turncylinder1/2‐turnintheoppositedirectionofSTEP7.
9. ReassemblebyreversingSTEPS1‐6.
FIGURE 5.6 Adjusting Gas Spring Recline Cylinder Assembly - Model IH6077A Only
Replacing the Release Handle and Cable Assembly -
Model IH6077A Only
NOTE:Forthisprocedure,refertoFIGURE 5.7onpage 26.
1. Withonehand,squeezereleaseleveruptowardmountingbracketandremoveanchor
endofcableassemblyfromslotinreleaselever(DetailʺBʺ).
CAUTION
When removing the cable from the mounting bracket, use care to pull straight out of
"V" notch. DO NOT remove by bending the cable. Damage to the cable may occur.
2. RemovecableassemblyfromʺVʺnotchofthemountingbracket(DetailʺBʺ).
3. Removethemountingscrewthatsecuresthecabletothebackframe.
4. Removethemountingscrewwhichsecuresthereleasehandletothepushhandle
(DetailʺAʺ).
5. Securenewreleasehandletothepushhandlewiththe
existingmountingscrew.
Securelytighten(DetailʺAʺ).
DETAIL “B” -
TIGHTENING THE
CABLE
DETAIL “A” -
LOOSENING THE
LOCKNUT
Gas Spring
Recline
Cylinder
Locknut
Bottom Bracket
Cylinder
Cable
Clevis Pin
Clevis Pin
Gas Spring
Recline
Cylinder
Mounting
Bolt
Back Frame
Cable
Mounting
Screw
Cable
Locknut
Back
Frame
Retaining
Ring