Support User Manuals

Invacare IH6065 series Mobility Aid User Manual

Open as PDF

of 32

SECTION 5—MAINTENANCE

Part No. 1141494 23 Invacare Mobile Recliners

1. Reclinethereclinertoraisethefootrest

assembly.RefertoRecliningtheChair

onpage 15.

2. Removethefourhexscrewsthatsecure

theexistingfootrestcushiontothe

reclinemechanism.

3. Alignthefourmountingholesofthe

reclinemechanismwiththefour

mountingholesofthenewfootrest

cushion.

4. Usingfourhexscrews,securethe

footrestcushiontotherecline

mechanism.

FIGURE 5.3 Replacing the Footrest

Cushion

Replacing the Recline Mechanism Guard

NOTE:Forthisprocedure,refertoFIGURE 5.4onpage 24.

NOTE:Rightandleftsidesaredeterminedfromtheuserʹsseatedposition.

1. Engagewheellocks.

2. Carefullytipreclinerontotherightside.Besuretherearenoobstructionsonor

aroundthefloorbeforedoingthis.

3. Removethesidepanel.RefertoRemoving/InstallingtheSidePanelonpage 28.

4. RemovefourexistingboltsA,B,C,andDfromsideframeasshowninFIGURE 5.4on

page 24.

5. Removeexistingreclinemechanismguard.

6. Positionnewreclinemechanismguardagainstthesideframewiththefoldededge

down.

7. Alignholesofnewreclinemechanismguardwithholesonsideframe.

8. Secure

newreclinemechanismguardtosideframewithboltsA,B,C,andD.Securely

tighten.

9. Installthesidepanel.RefertoRemoving/InstallingtheSidePanelonpage 28.

10. Placechairintheuprightposition.

NOTE:Ifbindingorpinchingofreclinemechanismguardoccurs,contactInvacare.

11. Carefullytipreclinerontotheleftside.Ensuretherearenoobstructionsonoraround

thefloorbeforedoingthis.

12. RepeatSTEPS3‐10toinstallremainingreclinemechanismguard.

Hex Screws

Footrest Cushion

Footrest

Assembly

Recline

Mechanism

previous next