Filter
Top Products
SECTION 7—SEAT
300 and 400 34 Part No. 1118395
SECTION 7—SEAT
ƽ WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all
attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power OFF and
remove key from ignition.
REMOVING/INSTALLING THE SEAT
NOTE: For this procedure, refer to FIGURE 7.1.
REMOVING
1. Fold down seat back.
2. Pulling UP on the seat lever, lift the seat assembly UP and away from the seat post.
FIGURE 7.1 - REMOVING/INSTALLING THE SEAT
INSTALLING
1. Pulling UP on the seat lever, lower the seat assembly onto the seat post.
NOTE: If necessary, slightly twist seat assembly back and forth to lock in place.
2. Release seat lever and lift UP on seat assembly to ensure the seat is secure.
Seat Post
Seat Assembly
Seat Lever