SECTION 8—FRONT CASTERS
Part No. 1130169 27 Atlas™
SECTION 8—FRONT CASTERS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Adjusting Front Caster Height
ƽ WARNING
Make sure both front casters are the same size and are installed into the same
respective mounting hole before using the wheelchair. Otherwise, injury may occur.
NOTE:Forthisprocedure,refertoFIGURE 8.1.
1. Removethehexscrew,washersandlocknutthatsecurethefrontcastertothefork.
2. Toreinstallthenewfrontcasterontothefork,reverseSTEP1.
FIGURE 8.1 Adjusting Front Caster Height
Locknut
Fork
Front
Caster
Hex
Screw
NOTE:Adjustableheight
forkshown.