Filter
Top Products
SECTION 7—REAR WHEELS
Atlas™ 26 Part No. 1130169
SECTION 7—REAR WHEELS
ƽ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Removing/Installing Rear Wheels
ƽ WARNING
Only a qualified technician may change the size of the rear wheel or the
seat-to-floor height.
Make sure both rear wheels are the same size and are installed into the same
respective mounting hole before using the wheelchair. Otherwise, injury may occur.
NOTE:Forthisprocedure,refertoFIGURE 7.1.
1. Removethedustcap,hexscrew,spacerandlocknutthatsecuretherearwheeltothe
wheelchairframe.
2. RepeatSTEP1fortheoppositerearwheel.
3. Toreinstalltherearwheel(s)ontothewheelchair,reverseSTEPS1‐2.
4. Torquethelocknutto40ft‐lbs.
5. Adjustthewheellocks.RefertoAdjustingWheelLocksonpage 28.
FIGURE 7.1 Removing/Installing Rear Wheels
Dust Cap
Hex Screw
Spacer
Wheelchair Frame
Locknut
Axle Mounting Hole
Rear Wheel