Filter
Top Products
9
HANDLING PROCEDURES
FIGURE 1 - PACKAGING
HANDLING PROCEDURES
SHIPPING AND TRANSPORTATION
INSTRUCTIONS
NOTE: Unless the Patient Lift is to be used
immediately, retain boxes, containers and pack-
ing material for use in storing until use of the
Patient Lift is required.
Inspection
1. Examine exterior of the Patient Lift for nicks,
dents, scratches or damages. Inspect all
components.
Storage
1. Store the repackaged Patient Lift in a dry area.
2. DO NOT place other objects on top of the
repackaged Patient Lift.
If the Patient Lift is to be reshipped by common
carrier, it should be packed in the same carton.
Extra cartons are available from Invacare.
Unpacking
1. Check for any obvious damage to the carton or
its contents. If damage is evident, notify
Carrier/Invacare Dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the
carton.
H
A
N
D
L
I
N
G
P
R
O
C
E
D
U
R
E
S
Detail A
Screw Lift
(Ref.)
See Detail A
Angle Swivel Bar (Ref)
Tape (Ref)
Tape Hex Key Here
Tape (Ref)
Apply stretch wrap 5 to 6
times around mast
Apply stretch wrap 5 to 6 times
around mast
Mast with pump
(Ref.)
Swivel Bar
(Ref)
Tape (Ref)
Tape (Ref)
Tape Hex Key Here
Model 9886
Plastic Bag
Model 9885
Model 9885 CRD
Model 9884
Model 9884P
Not used on
model 9886