Filter
Top Products
22
ATTACHING THE SLING HARDWARE
4. The S-hook MUST be inserted through the hole
in the support bar with the open end facing away
from the patient (FIGURE 2).
5. The O-ring of the chain assembly is the
suggested location to attach to the swivel bar,
however, by changing to different links, you can
reposition the patient into a reclining or more
upright position.
WARNING
When changing to different lengths, DO NOT
disconnect the O-rings of the chains from the swivel
bar. Position BOTH the O-rings and additional chain
link onto the hooks of the swivel bar.
6. The straps can be simply adjusted to achieve the
same effect.
7. With the sling positioned under the patient, and the
metal support bars in place, you are now ready to
move the lift into position to attach the sling hardware
to the swivel bar.
ATTACHING THE SLING HARDWARE (Cont.)
A
T
T
A
C
H
I
N
G
S
L
I
N
G
FIGURE 2B - ATTACHING THE CHAINS OR STRAPS TO THE SLING
Short Section
Long Section
S-Hook Open
End Away
From Patient
D-Ring
Adjustable
S-Hook
Open-End Away from Patient
Short Section of Chain
O-Ring
Long Section of Chain
S-Hook Open-End
Away from Patient