Invacare 9000 SL Mobility Aid User Manual


 
Part No. 1056953 7 9000 Series
9000 SL 9000 XT
Overall Width: 23 or 25-inches 21, 22, 23, 25, 27, or 29-inches
Overall Depth: 43-1/2-inches
(With Front Riggings)
Seat Width: 16, 18 or 20-inches 14, 15, 16, 18, 20 or 22-inches
Seat Depth: 16 or 18-inches 16, 17, and 18-inches
SEAT-TO-FLOOR**
(By Frame Style)
Tall/Adult: N/A
Adult/Hemi: 15-1/2 to 19-1/2-inches in 1-inch increments
Super Hemi: N/A 13-1/2 and 14-1/2-inches
Back Style: Sectional - 1-inch increments Adjustable* - 1-inch increments
Adjustable Angle - 85° to 110°
in 5° increments
Back Height: 15 to 19-inches in 1-inch increments
Arm Styles: Swing Back* Space Saver, Swing Back Removable,
Desk* or Full Length in Space Saver* or Conventional in
Fixed* or Adjustable Height Desk* or Full Length and in
Fixed* or Adjustable Height
Front Riggings: Swingaway Footrests and Elevating Legrests
Rear Axle: Permanent* and Quick-Release
Rear Wheels: 20, 22 and 24*-inch Composite*; Urethane*,
Pneumatic or Pneumatic-Flat Free Insert
Handrims: Composite* and Aluminum, Composite*, Aluminum, Steel
Steel and Plastic Coated
Wheel Locks: Toggle Lock - Push or Pull
Caster Size: 6 x 1-inch Urethane, 6 x 1-inch Urethane,
8x1-1/4-inch* Urethane, 8x1-1/4-inch* Urethane,
8x1-inch Solid Rubber and 8x1-inch Solid Rubber and
8x1-1/4-inch Pneumatic or 8x1-1/4-inch Pneumatic or
Pneumatic-Flat Free Insert Pneumatic-Flat Free Insert,
8x1-3/4-inch Semi Pneumatic
Upholstery: Black Nylon*, Black Vinyl Black Nylon*,
Black Sail Cloth,
Heavy Vinyl
Frame Colors: Chrome* and Colors Chrome* and Colors
Weight (18 x 16-inch seat): 33-1/2 pounds 31 pounds
Shipping Weight (approx.): 43 pounds 41-1/2 pounds
16x16-inch Seat Frame
with complete package
SPECIFICATIONS
* NOTE: These options are standard for this model.
** NOTE: The seat-to-floor heights are based on urethane tires. If wheelchair is equipped with
pneumatic (properly inflated) or solid rubber tires, add 1/4-inch to the measurements listed above.
These heights can vary +/- 1/4-inch due to tire wear and manufacturing tolerances.
SPECIFICATIONS
SPECIFICATIONS