Filter
Top Products
Bench Receiving Scale
2
Installation and Setup
by an Authorized
Hobart Technician
Before using your scale for the first time, an Authorized
Hobart Service Technician must install and set up your
scale. This includes:
¥ Mounting the display and display pole to the platform.
¥ Setting an automatic shut off time as an energy saver to
extend battery life.
¥ Calibrating your scale.
Manual Overview
The following special instructions are used in the manual:
☛ Note
A note is information that you need to know, but it is not an
actual step in the procedures.
✎ Tip
A tip is additional information that may be useful when you
are using the system.
Look At This
Look At This is information to alert you that you may be
doing something that will permanently alter your system.