Filter
Top Products
Bench Receiving Scale
14
Operating in Operator
Mode
Access Operator Mode to operate one-touch tare, weigh
products, and weigh items in batches.
Weighing a Product Using
One-Touch Tare
If you do not know the package weight (tare value), use
one-touch tare.
To operate one-touch tare:
1. Place the container on the platter. The weight of the
container displays.
2. PRESS
TARE
. The display changes to 0.0 and the tare
indicator is lit.
3. Place the product in the container on the platter. The
display will indicate the net weight.
4. Remove the container and the product from the platter.
The negative weight of the container (tare) displays.
5. PRESS
TARE
. The weight display changes to 0.0, and the
tare indicator no longer illuminates.
Weighing a Product When
Preset Tare is Set
When weighing the product in Preset Tare Mode, the weight
of the product (net weight) displays.
Once the tare is preset:
1. Place the container on the platter. 0.0 displays.
2. Place the product on the platter. The net weight displays.
Weighing a Product When
Upper and Lower Weight
Limits Are Set
When weighing a product in Upper and Lower Weight
Limit Mode, the Over or Under indicator illuminates if the
product weight is over or under your set weight limits. The
Accept indicator illuminates if the weight is within the set
weight limits.
Once the weight limits are set:
1. Place the product on the platter. The weight of the
product displays, and the Over, Under, or Accept
indicator illuminates.
2. If the Over indicator illuminates, remove some of your
product until the Accept indicator illuminates.
3. If the Under indicator illuminates, add some of your
product until the Accept indicator illuminates.