Filter
Top Products
Power management
A “Monitor Saver” turns off the video signal to the monitor after a designated idle time, allowing the
monitor to enter a power-saving mode. Parameters for this mode are available by right-clicking on the
desktop background and selecting Properties > Screen Saver > Power.
System time
After power off, clock time is not lost as long as the power source remains plugged in. You can manually
set the local time, or you can automatically set the local time utility to synchronize the thin client clock
to a time server at a designated time.
NOTE: The Windows Time service is Stopped by default. You can Start the service via the
administrative tools control panel applet. You may want to Start the service and maintain correct time
because some applications may require access to the local thin client time. To open the Date and Time
Properties dialog, click on the time area in the task bar or double-click the Date and Time icon in the
Control Panel.
8 Chapter 2 Configuration ENWW