Filter
Top Products
10
Over Range: A flashing value of the maximum concentration
indicates an over range condition. The concentration of the
sample is beyond the programmed range: dilute the sample and
re-run the test.
c) during calibration procedure
Standard Low: The standard reading is out of range.
Standard High: The standard reading is out of range.
Cap error: the cuvet is not inserted correctly and an excess ambient
light is reaching the detector. If the cover is properly installed, then
contact your dealer or the nearest Hanna Customer Service Center.
d) other errors and warnings
Battery low: The battery voltage is getting low and the battery
needs to be replaced.
Dead battery: This indicates that the battery is dead and must be
replaced. Once this indication is displayed, the meter will lock up.
Change the battery and restart the meter.