Filter
Top Products
FR566DG-INS-LAB-RevC13: Deluxe Clinical Care Recliner Assembly and Operating Instructions 17
Heat and Massage Unit Operation Instructions
1. Plug the power supply cord into any
grounded outlet.
2. The Heat and Massage Unit is operated
using the single multi-position selector
switch located on the right side of the
recliner underneath the armrest. The
Heat and Massage functions can be
operated independently. The selector
switch faceplate is shown at right.
3. Press the selector switch UP to activate the HEAT FUNCTION.
4. Press the selector switch DOWN to activate the MASSAGE FUNCTION.
5. The selector switch has THREE HEAT FUNCTION SETTINGS and FOUR MASSAGE
FUNCTION SETTINGS as follows:
a. HEAT FUNCTION SETTINGS:
1) Press selector switch UP for Setting 1: High Heat, 106°F (41°C), brightest LED.
2) Press selector switch UP AGAIN for Setting 2: Medium Heat, 104°F (40°C), bright
LED.
3) Press selector switch UP AGAIN for Setting 3: Low Heat, 100°F (37°C), dim LED.
4) Press selector switch UP AGAIN: Heat function shuts off.
5) There is a small red indicator light, which illuminates only during the Heat
function, in the selector switch. The light's brightness is determined by the Heat
level being used: Brightest = High Heat; Dimmest = Low Heat.
b. MASSAGE FUNCTION SETTINGS:
1) Press selector switch DOWN for Setting 1: Gentle Lower Back Massage.
2) Press selector switch DOWN AGAIN for Setting 2: Firm Lower Back Massage.
3) Press selector switch DOWN AGAIN for Setting 3: Gentle Upper and Lower Back
Massage.
4) Press selector switch DOWN AGAIN for Setting 4: Firm Upper and Lower Back
Massage.
5) Press selector switch DOWN AGAIN: Massage function Shuts Off.
6. The Heat and Massage Unit automatically shuts off at the following times:
a. HEAT FUNCTION: After one hour of continuous use at the same level.
b. MASSAGE FUNCTION: After fteen minutes of continuous use at the same level.
c. To restart the Heat and Massage Unit, follow the instructions above.