Filter
Top Products
Alante DX/LT Owner’s Manual Rev A_011811
VI. COMFORT SETTINGS
Arm Height Adjustment
1. Loosen the arm height adjustment screws located on the back of the arm.
Figure 16
2. Lift the arm to the desired height making sure not to exceed the maximum height of the
arm.
3. Tighten the arm height adjustment screw to secure the arm.
4. Repeat steps 1-3 to adjust the opposite arm.
Figure 17
Arm Width Adjustment
1. Use a 4mm Allen wrench to loosen the adjustment screw at the lower rear of the seat.
Figure 18
21
Adjustment screw
(4mm)
A
rm
Adjustment screw
(4mm)
Adjustment screw
(4mm)