Filter
Top Products
Alante DX/LT Owner’s Manual Rev A_011811
VI. COMFORT SETTINGS
Headrest Height Adjustment
1. Standing behind the chair, push and then release the clamp on the left post of the
headrest while you are pulling up or pushing down on the head rest. See figure 14.
2. The headrest will “click” to a stop in one of the preset positions.
3. Repeat step 1 until the headrest is at the desired height.
Backrest Angle Adjustment (Refer to figure 15)
1. Place a 10 mm wrench on the lock nut and use a 5mm Allen wrench to loosen the bolt.
2. Remove the bolt and place it into the desired position. Note, that there are four angle
positions available, 90 degrees to 120 degrees.
3. Replace the lock nut and tighten.
Figure 15
Note: The backrest can be folded down to minimize chair height during transport.
20
Figure 1
4