Filter
Top Products
Alante DX/LT Owner’s Manual Rev A_011811
VI. COMFORT SETTINGS
You may be spending a great deal of time on your Alante DX/LT™. To provide you with the
maximum seating comfort, Golden Technologies, Inc. has designed this power chair to
incorporate the following adjustments for operator comfort.
COMFORT SETTINGS
1. Seat height 4. Arm height 7. Footrest angle
2. Headrest height 5. Arm width 8. Joystick bracket length
3. Backrest angle 6. Armrest angle 9. Joystick position
Make certain that the power to your Alante DX/LT ™ is turned off before
making any adjustments, to eliminate the risk of the joystick being accidentally bumped
and activating the power chair.
Seat Height Adjustment
The seat is a center post design that is easily adjusted for height.
To adjust the height to a comfortable level:
1. Remove the seat.
2. Place a 17mm wrench on the lock nut, and insert an 8mm Allen wrench into the bolt.
3. Loosen and remove the bolt, washers and lock nut, noting their placement.
3. Set the seat post to one of the three adjustment positions.
Figure 13
5. Replace the bolt, washers and lock nut in the same order you remove them and tighten
securely.
19
Bolt
,
washers
,
and lock nut.