Filter
Top Products
thawing time may vary. The amount of air left in the plasma
thawing bag during thawing will also affect thawing time.
The laboratory personnel can set the desired thawing time for
each unit to be thawed. They do not have to all be set for the
same thaw time.
f. To change the default TIMER :
Press the START/CHANGE key for the selected bag location,
then press the numeric key pad for the desired minutes. All
keys must be pressed within 5 seconds of each other. Minutes
must be between 1 and 99.
g. To start rocking motion of the bath, press the ROCK key.
Rock indicator will light. Pressing the ROCK key at any time
will stop the rocking motion.
NOTE : If the water spills over the top of the bath when
rocking motion begins, stop the bath from rocking and
remove a small amount of water.
h. To thaw an additional bag, place it in slot 2, 3, etc. Adjust
the timer as required, follow instructions in Section 2.5-f
above.
The product should be thawed when an audible signal is
heard and the respective BAG TIMER is at zero. Remove the
product from that slot location, check the bag contents to
ensure that it is completely thawed. If additional thawing is
required, return the bag to the holder and set timer for the
desired thaw time.
8