Dell E20S Microscope & Magnifier User Manual


 
NOTE: Secure the screws along the edges of the system board first, and follow a diagonal path to complete
this procedure.
5. Install the following as applicable:
a. heat sink and processor
b. memory modules
c. internal dual SD module
d. internal USB key
e. expansion-cards
f. iDRAC ports card
g. PCIe card holder
h. system cooling fan
i. cooling shroud
6. Reconnect all cables to the system board.
7. Close the system.
8. If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
9. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
10. Import your new or existing iDRAC Enterprise license. For more information, see
iDRAC7 User's Guide
, at dell.com/
support/manuals
.
122