Filter
Top Products
9
Care and Maintenance
Repairs
Repair work must be performed by trained service
technicians. Any attempt by untrained persons
to perform repairs may lead to hazards for the user.
Cleaning
! Disconnect the scale from the AC adapter and unplug
any data cables that are connected to the scale
! Make sure that no liquid enters the scale housing
! Do not use any aggressive cleaning agents (solvents or
similar agents)
l Clean the scale using a piece of cloth which has been
wet with a mild detergent (soap)
l After cleaning, wipe down the scale with a soft,
dry cloth
Removing and Cleaning
the Weighing Pan
l Lift up and remove the
weighing pan together with
the pan support by gripping
them from under the shield
ring. Make sure that you
do not damage the
weighing system in doing so.
Safety Inspection
If there is any indication that safe operation of the scale with
the AC adapter is no longer warranted:
l Turn off the power and disconnect the equipment from
AC power immediately
> Lock the equipment in a secure place to ensure that it
cannot be used for the time being
Safe operation of the scale with the AC adapter is no longer
ensured when:
– there is visible damage to the AC adapter
– the AC adapter no longer functions properly
– The AC adapter has been stored for a relatively long
period under unfavorable conditions
In this case, notify your nearest Service Center or the Inter-
national Technical Support Unit. Maintenance and repair
work may only be performed by service technicians who are
authorized by Citizen and who
– have access to the required maintenance manuals
– have attended the relevant service training courses
Instructions for Recycling
the Packaging
To ensure safe shipment, your scale has been packaged
using environmentally friendly materials. After successful
installation of the scale, you should return this packaging for
recycling.
For information on recycling options, including recycling
of old weighing equipment, contact your municipal waste
disposal center or local recycling depot.