Filter
Top Products
2
l Place the components
listed below inside the
chamber in the order given:
– Shield plate
– Shield ring
– Pan support
– Weighing pan
– Gem tray (not shown)
Connecting the Scale to
AC Power/Safety Precautions
Use only original AC adapters:
– for Europe: 6971948
– for the US: 6971947
– for the RSA: 6971949
– for Australia: 6971950
l Insert the right-angle plug
into the jack
l The AC adapter rated to Class 2 can be plugged
into any wall outlet without requiring any additional
safety precautions
The ground is connected to the scale housing, which can be
additionally grounded for operation.
Leveling the Scale
Level the scale any time you
set it up in a new location.
Use only the 2 front feet of the
scale for leveling.
l Turn the 2 front feet as
shown here in the
illustration until the air
bubble is centered in the
level indicator
> In most cases this will
require several
adjustment steps
Anti-theft Locking Device
To protect against theft, use
the mounting lug on the rear
panel of the scale.
l Secure the scale at the
place of installation,
for example with a chain
or a lock
Getting Started
Storage and Shipping Conditions
Do not expose the scale to shocks, vibrations, moisture
or extreme temperatures.
Unpacking the Scale
l After unpacking the scale, check it immediately for
any visible damage as a result of rough handling during
shipment.
If you see any sign of damage, proceed as directed in
the chapter entitled “Care and Maintenance,” under the
section on “Safety Inspection.”
Save the box and all parts of the packaging until you have
successfully installed your scale. Only the original packaging
provides the best protection for shipment. Before packing
your balance, unplug all connected cables to prevent
damage.
Equipment Supplied
The equipment supplied includes the components
listed below:
– Scale
– Weighing pan
– Pan support
– Shield ring
– Shield plate
– Gem tray
– AC adapter
– Dust cover
– Operating instructions
Installation Instructions
Your scale is designed to provide reliable weighing results
under normal ambient conditions. When choosing a
location to set up your scale, observe the following so that
you will be able to work with added speed and accuracy:
– Set up the scale on a stable, even surface
– Avoid placing the scale in close proximity to a heater
or otherwise exposing the balance to heat or direct
sunlight
– Protect the scale from drafts that come from open
windows or doors
– Avoid exposing the scale to extreme vibrations during
weighing
– Protect the scale from aggressive chemical vapors
– Do not expose the scale to extreme moisture over long
periods
Conditioning the Scale:
Moisture in the air can condense on the surfaces of
a cold scale whenever it is brought into a substantially war-
mer place. If you transfer the scale to a warmer
area, make sure to condition it for about 2 hours at room
temperature, leaving it unplugged from AC power.
Setting up the Scale