Filter
Top Products
- Eng 10 -
• Apply the wrist cuff to the wrist and make sure
it is not too loose or too tight. If the wrist cuff
is applied inappropriately, it may display an er-
ror or abnormal values. Pull the wristlet tight
and close the “Burr closure”. Wrist circumfer-
ence: 13.5-19.5 cm.
CAUTION
Do not grasp the unit too tightly. Keep your left
wrist relaxed during measurement period. Do
not apply physical pressure against unit with
wrist before or during measurement. All mea-
surements must be performed while you are
seated and with your left hand on a table held a
level with your heart. Keep your body still and
relaxed during measurement.
Measurement Procedures for
People With a Weak Pulse
• Apply the middle part of the wrist cuff to the
artery in the wrist to measure blood pressure.
2. To start the Measurement
1) Press the “Start/Stop” switch. All display marks
appear for approx. 1 second. All displays dis-
appear and the time is updated.
2) The blood pressure measuring symbol will ap-
pear on the display and then the air pressure
will automatically pump up to 195mmHg.
3) If blood pressure tends to be on the high level,
the air pressure will automatically increase
again to the required level for measurement.