Filter
Top Products
English Español
Português
DeutchItaliano
Français
- Eng 7 -
Rest the elbow on a table so that the section of the upper
arm is at the height of the heart. Relax the lower arm across
the table and remain still, since movement - artifacts may
falsify the measuring result.
Make measurements in either a seated or reclining posture
with the palm turned upward.
Insert the air connector from the cuff into the tube socket
at the mainframe until it is tightly connected.
2. Carrying out the Measurement
Press the “POWER / START” switch.
When the “POWER / START” switch is pressed, the last-
measured systolic blood pressure and diastolic blood pres-
sure are displayed for about 2 seconds.
At the first measurement after battery replacement the mark
of “Q” is displayed for about 2 seconds.
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min
SYSTOLIC mmHg DIASTOLIC mmHg
PULSE/min