Filter
Top Products
- Eng 6 -
MEASUREMENTS
1. Attaching of Arm Cuff and Posture
During Measurement
Unfasten and open the cuff as shown in the figure.
Wind the arm cuff around the left upper arm tightly so that
bottom edge of the cuff is positioned about 1 – 2cm above
the elbow joint.
• When you will wind the cuff, please wind the cuff next to
the skin of possible.
(If measurement is made by rolling the shirts or jacket
up over the arm, this will constrict the upper arm and
prevent accurate measurement.)
• Cuff tube should be placed on the inside of your arm as
figure.
• Please make sure that the cuff is fastened tightly. Note
that uneven cuff winding will prevent proper measure-
ments.