Filter
Top Products
The 10-test disc is out of
test strips.
Insert a new 10-test disc.
40
You have not pushed
the meter handle all the
way in.
Push the meter handle in
until it clicks. You must push
the handle all the way in
and see the flashing blood
drop before you touch the
strip to the blood drop.
Test result is below
0.6 mmol/L (10 mg/dL).
Repeat test and make sure
test strip is completely filled.
If LO appears again, contact
your physician or healthcare
professional (HCP).
Test result is above
33.3 mmol/L (600 mg/dL).
Wash your hands and test
site. Repeat the test. If HI
appears again, contact
your physician or HCP.
The meter will mark a test
result with a thermometer
and an X if the meter is
too cold or too hot when
the test is performed. The
result will not be included
in any averages calculated.
Test only when the meter
temperature is between
10°C and 40°C (50°F and
104°F).
What You See What It Means What You Do
TROUBLESHOOTING AND ERROR CODES:
When you have a problem or a question concerning what
you see on your screen, the following may be helpful.