Bard WUVCLP-C Light Therapy Device User Manual


 
Page 3
I. GENERAL
This product is not sold as a medical device and is not for the purpose of diagnosis of any
disease or condition nor for use in the mitigation, treatment, or prevention of any disease or
condition.
UNPACKING
The WUVCLP light package is shipped in one carton, which contains the electrical wires, UV
light assembly, UV light bulb, 4 mounting screws, alcohol wipe, transformer for the 460 volt
models, and installation instructions.
Upon receipt of the carton be sure to compare the model number found on the shipping label
with the accessory identification information on the ordering and shipping document to verify
that the correct accessory has been shipped.
Before signing the freight bill, inspect the carton of each ultraviolet light assembly as it is
received to verify that all the ordered items have been received and that no damage has
occurred to any of the items during shipping. Note any shortages or damage on all copies of
the freight bill. The receiving party must contact the last carrier immediately, preferably in
writing, requesting inspection by the carrier’s agent. Concealed damage of equipment not
discovered until after unloading must be reported to the carrier within 15 days of its receipt.
DESCRIPTION
The WUVCLP-A (208/230 volt) and WUVCLP-C (460 volt) ultraviolet Light air purifiers are
designed to be installed in all 1-1/2 through 6 ton Bard wall mounted products. They are
electrical ultraviolet lights designed to reduce indoor air contamination and prevent growth of
new microorganisms (mold and bacteria).
Specifications:
Electrical: 60 watts
Bulb Size: 28” length
Application: WA18 through WA72
WH18 through WH61
WH261 through WH611
SH261 through SH611
Models:
The WUVCLP-A is compatible with all 230/208 volt single and three phase, Bard 1-1/2
through 6 ton wall mount units.
The WUVCLP-C is compatible with all 460 volt three phase, Bard 1-1/2 through 6 ton wall
mount units.