Filter
Top Products
3
GENERAL
TURN-ON
Each time you turn on the TechChek 830-KP it runs through a self
check then returns to the most recently selected settings.
SOURCE - The three QUIK-CHEK outputs will be the same as
previously stored. Each time a different function is selected, the
associated three QUIK-CHEK outputs will be recalled.
READ - The 830-KP is ready to measure the same signal as the
last time it was used and automatically updates the MAX & MIN
readings for recall at any time.
CONNECTIONS
TechChek 830-KP has protected banana jacks compatible with
standard and safety banana plugs.
Included with your TechChek are: a pair of safety test leads with
test probes, safety alligator clips, standard alligator clips and
spade lugs for attachment to a wide variety of instruments. An
additional test lead and spade lug are also included for 3-Wire RTD
connections.
A second pair of test leads with right angled safety banana plugs
and alligator clips for mA Read and Power Transmitter functions.
Thermocouple connections are made through a miniature
thermocouple socket.
Optional KIT-1 includes T/C wires for Type J, T, E & K with miniature
T/C plugs (not included).
CAUTION! To prevent accidently overloading the instrument
being tested, correctly set up the outputs before connecting
the TechChek 830-KP to any instruments to be calibrated.
!
!
!
!
2
BAR, mBar, Atm, Kgf plus torr, inches and mm of mercury
or water at a variety of temperatures. Characterized
modules for laboratory accuracy in the shop, control room or
field.
Voltage Calibration
Calibrate all your DC millivolt and voltage
instrumentation. Source from 0.00 to 110.00 mV and 0.00
to 10.25 V. Read up to 110.00 mV, 11.00 V and 200.0 VDC.
Temperature Calibration
Source and Read directly in °C and °F for T/C types J,
K, T, E, R, S & N and four Pt 100 Ohm, Ni 120 Ohm and Cu
10 Ohm RTDs. Resolution to 0.1°. Cold junction
compensation tracks ambient temperature changes.
Frequency Calibration
Generate zero crossing square waves from 1 to 1000 Hz,
0.01 to 10.00 kHz and from 1 to 1000 CPM (Counts-Per-
Minute). Built-in frequency counter measures Hz, kHz & CPM.
Measure AC Voltage
Check line voltage or mains from 0.0 to 250.0 volts AC.
Great for troubleshooting power problems.
Check Continuity
Locate pairs of wires, open connections and shorts with
Rear Label - Condensed Operation Guide