Filter
Top Products
17
Operating the Probe
Recommended Test Equipment
Adapter Combinations
The figure below shows the allowed adapter and probe connections. There are two
specific combinations that should not be used.
• Do not attach the ac adapter between an attenuator adapter and the probe.
An attenuator adapter must be terminated by the input resistance of the probe. The
ac adapter isolates the probe input resistance.
• Do not cascade two attenuator adapters.
The attenuator adapters are designed to be terminated by the 1 MΩ resistance of the
probe. The input resistance of the attenuator adapter is 9 MΩ for the 10x adapter and
10 MΩ for the 100x adapter.
Figure 1-9
Allowed Adapter Connections