Filter
Top Products
3-33
Adaptec Storage Manager-Browser Edition
3 When you have completed all selections, press 4 to exit.
Configuring E-mail Notification
After you have selected the level of events, you will be asked if you
would like to configure e-mail notification. Choosing N (no) exits
the notifier configuration mode.
To configure e-mail notification:
1 Select Y.
2 A prompt is displayed to enter the IP address or hostname of
the SMTP e-mail server on the network. Type in either the
hostname or IP address of the server and press Enter.
3 Next you will be prompted for the port number that the e-mail
server is using. Accept the default if that is correct for your mail
server, or provide the appropriate value and press Enter.
4 Another prompt is displayed, prompting you to enter an e-mail
address that all bounced mail should be forwarded to. Type in
the full SMTP e-mail address and press Enter.
5 The next prompt will enable you to enter the e-mail address of
the first user to be notified. Type in the full SMTP e-mail
address and press Enter.
6 Select the level of events you want the first user to receive. If
you wish to add more users, press Y and repeat the steps above.
7 When you have completed all selections, press 4.
8 Press Y if you want to add additional recipients or press N to
exit the configuration utility.
9 Restart ARCPD and the notifier.
Table 3-3 Commands for Event Log
Event Commands Event Log Levels
1Critical
2Warning
3 Informational
4Exit
UG.book Page 33 Saturday, October 26, 2002 12:08 PM