Filter
Top Products
Battery
Installation
Low battery warning:
When the battery power becomes low, the
low battery symbol “”will appear on
the display.The thermometer can still be used during
this time, but thebatteries should be replaced as soon
as possible. If the batteries run out completely,“Lo”
will be displayed along with the low battery symbol. In
this case, the batteries will need to be replaced before
using the thermometer again.
Replacing the Battery:
1. Use a Phillips head screwdriver to loosen battery
cover screw. Remove the battery cover.
2. Insert or replace 2 x 1.5 VAAAalkaline batteries into
the battery compartment, ensuring to match the
indicated polarity symbols.Always use new
batteries.
Battery-operated
1. Please properly dispose of the batteries away from
small children and heat.
2. It is recommended to remove the batteries if the
unit will not be used for an extended period of time.
3. Batteries must be disposed of in accordance with
local environmental and institutional policies.
4
3. Place the battery cover on the
thermometer and tighten the
screw to secure it in place.