A&D UT-302PBT Thermometer User Manual


 
2
Important
Information
Before
Use
When using this product, please be sure to follow all the
notes listed below.Any action against these notices may
cause injury or affect the accuracy.
1. Do not disassemble, repair, or remodel the
thermometer.
2. Be sure to clean the thermometer lens each time after
usage.
3. Avoid direct finger contact with the lens.
4. No modification of this equipment is allowed.
5. It is recommended that user take 3 temperatures. If
theyare different,use the average reading.
6. Do not expose the thermometer to extreme
temperature,very high humidity, or direct sunlight.
7. Avoid extreme shock or dropping the device.
8. Before the measurement, patients and thermometer
should stay in steady state room condition for at least
30 minutes.
9. Avoid measuring temperature in 30 minutes after
exercise, bathing, or returning from outdoor.
10. To protect the environment, dispose of empty batteries
at appropriate collection sites according to national or
local regulations.
11. Please use the thermometer solely forits intended
purpose.
Carefully hold the device when in use to avoid dropping
the device.
Allow one minute between successive measurements
as slight variations may occur if measurements are
taken over a short period of time. Use average
temperatures instead.
There are noabsolute body temperature standards.
Keep reliable records of your personal temperature to
serve as a reference for judging a fever.
Under any circumstances, the temperature taking
result is ONLY for reference. Before taking any medical
action, please consult your physician.
12.
13.
14.
15.