Filter
Top Products
ENGLISH 7
Measurements
• Remain still while the device is in operation.
• When a measurement is made with insufficient pressure, the device will
pump again to a higher pressure.
4. When the measurement is complete, the buzzer sounds and the air is
automatically released from the cuff. The systolic pressure, the diastolic
pressure readings, and the pulse rate are displayed.
5. Turning the power off
Press the START button to turn the power off. The device will remain in
standby mode.
6. Subsequent measurements
If a subsequent measurement is required, turn off the power and turn it on
again. When the "0 " appears, the device is ready for another measurement.
Note
Allow at least ten minutes between measurements on the same person.
7. Automatic power-off function
If the device is left on after a measurement, it will turn off automatically after
about one minute. It may be turned off at any time by pressing the START
button.