Filter
Top Products
Page 54 HV-WP/HW-WP Series16. RS-232C Serial Interface
16.3.2.
16.3.2.16.3.2.
16.3.2. Example of Setting Parameters
Example of Setting ParametersExample of Setting Parameters
Example of Setting Parameters
Step 1 Turn off the display.
Press the ON/OFF switch while the ZERO switch is
pressed and held. The function table is displayed.
Step 2 Select a parameter for the "baud rate ( f4 )" using the
ENTER and ∧ switches.
Step 3 Select "command mode ( f5 1 )" for the "output"
using the ENTER and ∧ switches.
Step 4 Select "format 1 ( f15 0 )" for the "format" using the
ENTER and ∧ switches.
Step 5 Press the ENTER switch to store the new parameters.
Return to the normal weighing mode using the ENTER
switch.
Step 6 Receiving a command, the scale replies.