Filter
Top Products
19
16
17
18
INSTALLATION
Remove one of the two screws that attach the guard prop to the
delivery guard on the NOPS. Install the supplied longer M4 screw
in its place and using the original nut secure the provided cable
clamp (subject arrow) to the underside of the guard. Make sure you
have the exhaust fan cable going through the clamp before securing
it to the guard.
Place the larger heat shield in the delivery as shown.
Place the small heat shield in the delivery and attach it to the larger
shield, with two 10-32 x 1/4 button head screws and flat washers.