Filter
Top Products
11
INSTALLATION
6
Secure the dryer to the brackets (four places) using the short button
head bolts, washer, and flanged nut (subject arrows). Leave the bolt
loose so the dryer can be moved front to back.
7
Note: If the press is equipped with an Airtech sprayer, you must
remove the spray bar from the dryer before installing it in the
press. To remove the spray bar from the dryer, remove the three
screws on the top of the dryer.
Set the dryer on the brackets with the cable exiting at the NOPS.
Run the cable under the mounting bracket (subject arrow, left
picture) and through the large hole in the side frame (subject arrow,
lower picture) directly under the mounting bracket.