Filter
Top Products
13
INSTALLATION
9
8
Position the dryer so it clears the gripper opening mechanism on all
three delivery gripper bars. The arm must clear both the top and
bottom of the dryer. The photo shows the arm clearing the top of the
dryer (subject arrow). After positioning the dryer, tighten the bolts
holding the mounting brackets to the press frame and the bolts
holding the dryer to the mounting brackets.
NOTE: If the press is equipped with an Airtech sprayer, pro-
ceed to step 11.
Attach two hoses to the elbows in the sprayer housing (subject
arrow, upper picture) and run the hose through the hole in the side
frame (subject arrow, lower picture ). Note how the hoses are tied
together with a zip tie in the upper picture on the left hand side.