Filter
Top Products
7
Using the Tag Dispenser
IMPORTANT NOTES
Do not bend, fold, or damage RFID tags because this may cause premature tag failure.
If you discover a tag with a hole punched through it, do not use the tag. A hole indicates that the tag
was identified as defective during inspection.
If you receive a system message indicating that a tag cannot be programmed, ask your conversion
coordinator where to put these tags.
Automatic Tag Dispenser components
The Automatic Tag Dispenser consists of the
following components
A Curved steel spring guide plate
B Two plastic core inserts
C Supply roll shaft
D Stop lever
E Take-up spool
F Tag dispenser switch
A
C
F
E
D
B