Filter
Top Products
10
7 Install the roll of tags on the supply
role shaft and thread the tags
through the unit to the take-up
spool.
On
Off
Jog
812_FSH_002
8 Remove the take-up spool endplate
and the take-up spool.
9 If there is a liner from the previous
roll of tags, remove it and put the
take-up spool back in place.
812_FSH_006
10 Connect the tag roll to the take-up
spool and reinstall the end plate.
812_FSH_00
7
The figure shows you how the tag
installation should look when you are
done with the procedure.
On
Off
Jog
812_FSH_008