Filter
Top Products
5
Specifications
Shipping Size Tag Types
Height 47.5 inches [1207mm]
Width 42.5 inches [1080mm]
Depth 30.0 inches [762mm]
Weight 338 lbs. [154 kg]
Model 711/ 811
Height 55.25 in. [1403mm]
Width 30.0 in. [762mm]
Depth 18.0 in. [457mm]
Weight 150 lbs. [68.2 kg]
Operating and Storage Temperature
Storage Temperature
and Humidity
50 to 90 degrees F
[10 to 32 degrees C]
20 to 70% RH, non-condensing
Typical Ambient
Temperature
50 to 104 degrees F
[10 to 40 degrees C]
Electrical Requirements
The customer must provide an electrical receptacle within 10
feet [3m] of the Conversion Station. If the Conversion Station
is to be used in the book stacks, it is the responsibility of the
customer to provide an extension cord.
For operations outside of the U.S. (OUS), the customer
must provide a power cord.
Voltage 110/120 VAC 50-60Hz
220/240 VAC 50-60Hz
Amperes 110/120 VAC – 5 Amps
220/240 VAC – 2.5 Amps
RFID Operating
Frequency
13.56 MHz
Make sure that you use the correct type of tag:
The Conversion Station Model 711 uses 3M™
D1 RFID tags only.
The Conversion Station Model 811 (used with
the 3M™ One-Tag RFID System) uses 3M™
ISO RFID tags.
3M inspects all RFID tags during manufacturing
and ensures that shipments contain the quantity of
good tags ordered. When defective tags are
discovered, the following occurs:
Tags are added to the shipment to make up for
defective tags discovered during the
inspection.
A hole is punched through defective tags if a
customer has purchased this option. Do not
use tags with holes in them.
CAUTION
To reduce the risk associated with environmental contamination related injury:
The Conversion Station contains a lithium battery, mercury in the monitor/display, and circuitry that contains
lead in the solder. At the end of service life, dispose of the Conversion Station in accordance with federal, state
and local requirements.