Digital I/O, Setup, and Utilities 203
02R User’s Guide
Preferences 2—Factory Settings
Aux Output Select
Using the Aux Output Select function, bus outputs can be assigned to the
analog aux send outputs, providing analog bus outputs. Bus signals 1 to 6
can be assigned individually to aux send outputs 1 to 6.
Shown below is the SETUP 2/4 page—Aux Output Select.
Initially, the aux buses are assigned to the analog aux outputs. A
highlighted AUX or BUS icon indicates which bus is assigned to an output.
Option / Setting Option / Setting
MIX Update Confirmation OFF Surround SWF Edit OFF
REC Recall Safe Faders OFF Link Surround Master OFF
Fader Flip Recall Safe OFF Auto Inc. TC Capture OFF
Touch Sense Select OFF Compact Automix Bulk OFF
Touch Sense Edit OFF Compact Scene Bulk OFF
Auto EQ Edit In OFF Show Compact Size OFF
Restore Last Edit Ch OFF Copy Initial Faders OFF
Surround X, Y Edit ON Tx 02R Link Message OFF
Surround CSR Edit OFF Rx 02R Link Message OFF
1. Use the [SETUP] button to
locate the SETUP 2/4
page.
2. Use the CURSOR buttons
to select the AUX and
BUS icons, and the
(ENTER) button to set
them.
SETUP
