A SERVICE OF

logo

5 - 40
ENG
2. Install:
stator assembly 1
lead holder 2
T
R
.
.
10 Nm (1.0 m · kg)
LT
T
R
.
.
6 Nm (0.6 m · kg)
3. Install:
woodruff key
generator rotor
•washer
generator rotor bolt
NOTE:
@
• Clean the tapered portion of the crankshaft
and the generator rotor hub.
When installing the generator rotor, make
sure the woodruff key is properly seated in
the keyway of the crankshaft.
Lubricate the generator rotor bolt and washer
with engine oil.
4. Tighten:
generator rotor bolt 1
NOTE:
@
While holding the generator rotor 2 with the
sheave holder 3, tighten the generator rotor
bolt.
Sheave holder
90890-01701
T
R
.
.
130 Nm (13.0 m · kg)
GENERATOR AND STARTER CLUTCH