A SERVICE OF

logo

5 - 38
ENG
REMOVING THE STARTER CLUTCH
1. Remove:
starter clutch bolts 1
starter clutch
NOTE:
@
While holding the generator rotor with the
sheave holder, remove the starter clutch bolts.
Sheave holder
90890-01701
EAS00351
CHECKING THE STARTER CLUTCH
1. Check:
starter clutch rollers 1
Damage/wear Replace.
2. Check:
starter clutch idle gear 1
starter clutch gear 2
Burrs/chips/roughness/wear Replace the
defective part(s).
3. Check:
starter clutch gear’s contacting surfaces a
Damage/pitting/wear Replace the starter
clutch gear.
4. Check:
starter clutch operation
▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼ ▼▼▼
a. Install the starter clutch gear 1 onto the
starter clutch 2 and hold the starter clutch.
GENERATOR AND STARTER CLUTCH